-
1 × ₹1,850.00 -
Subtotal: ₹1,885.00
-
Cylinder with End Cut
Cylinder with End Cut
- Size : Available is different sizes
- Cut Style: N, NK, NK-S
-
Cylinder -without end cut
Cylinder -without end cut
- Size: Available in different sizes
- Cut Style: N, NK, N-IX
-
GAT-Non Woven Belt 3 1/2 in X 15 1/2 in A Medium
GAT-Non Woven Belt 3 1/2 in X 15 1/2 in A Medium
- Size: 3 1/2 in X 15 1/2 in
- Mineral : Silicon Carbide
- Color : Maroon
- Grit : Different grits available
-
3M Non Woven Belt 3 1/2 in X 15 1/2 in A Medium
3M Non Woven Belt A Medium
- Size: 3 1/2 in X 15 1/2 in
- Mineral : Silicon Carbide
- Color : Maroon
- Grit : Different grits available
-
GAT-Non Woven Belt 3 1/2 in X 15 1/2 in Very Fine
Non Woven Belt Very Fine
- Size: 3 1/2 in X 15 1/2 in
- Mineral : Silicon Carbide
- Color : Blue
- Grit : Different grits available
-
GAT- Non Woven Belt 3 1/2 in X 15 1/2 in A Coarse
Non Woven Belt A Coarse
- Material : Non Woven
- Color: Brown
- Mineral : Aluminium Oxide
- Grade: A Course
- Size : 3 1/2 in X 15 1/2 in
-
GAT-709A Micro Angle Die Grinder
GAT – 709A Micro Die Grinder
- Free Speed : 70,000 RPM
- Collet Size :1/8″ (3 mm)
- Air Inlet : 1/4″
- Hose Size :1/4″(6 mm)
- Air Consumption : 1.5 (42.5) (CFM L/Min)
- Length : 7.1″ (181 mm)
- Weight : 0.14 kg
-
GAT-708 Micro Die Grinder
GAT- 708 Micro Die Grinder
- Free Speed : 70,000 RPM
- Collet Size :1/8″ (3 mm)
- Air Inlet : 1/4″
- Hose Size :1/4″(6 mm)
- Air Consumption : 1.5 (42.5) (CFM L/Min)
- Length : 5.5″ (140 mm)
- Weight : 0.2 kg
-
GAT-707 Extended Mini Die Grinder
GAT-707 Extended Mini Die Grinder
- Free Speed : 25000 RPM
- Collet Size :1/4″ (6 mm)
- Air Inlet : 1/4″
- Hose Size :3/8(10 mm)
- Air Consumption : 4″ (113 mm)
- Length : 9.7″ (246 mm)
- Weight : 0.6 kg
-
GAT 706 Engraving Tool
GAT-706 Engraving Tool
- Speed : 13000 BPM
- Air Inlet : 1/4″
- Hose Size ID : 6 mm
- Air Consumption : 1.1(31)
- Length : 6.3″(159)
- Weight : 0.15 kg
-
GAT-705R Reversible Drill
GI – Reversible Drill 7005R
- Brand : Glispro
- Model Num: 7005R
- Free Speed : 1800 RPM
- Chuck Size :3/8″
- Spindle Thread: 3/8″-24 Male
- Air Inlet: 1/4″
- Hose Size: 3/8″ (10mm)
- Air Consumption: 4(113) CFM(L/Min)
- Length : 7.4″(187 mm)
- Weight : 1.3 kg
-
Robo Finish 2.5HP Flexible Shaft Machine
Robo Finish 2.5 HP Flexible Shaft Machine
Brand : Sunner
- Motor : 2.5 HP, Three phase
- Single speed gear
- Speed : 8000 RPM
- Voltage : 440 volt
- Frequency : 50/60 Hz
- Includes 10 X 1500 metal shaft, WH 15 Tool Holder with Yoke & Base
- If required, Rubber shaft available at additional cost.